An electronic belt scale is widely used in industries like mining, cement, agriculture, and power generation for continuous and accurate measurement of bulk materials. To ensure its performance, conducting a material test is essential. This test verifies the weighing accuracy under actual operating conditions.

1. Why Perform a Material Test?

A material test checks whether the belt scale is measuring flow rates and total weights correctly when handling real materials. It's used for:

  • Initial calibration

  • Routine verification

  • Troubleshooting inaccurate readings

Without proper testing, errors can lead to production losses or incorrect billing.

2. Preparation Before Testing

Before starting, make sure:

  • The belt scale is properly installed and zeroed

  • The conveyor is running under normal load conditions

  • The material has consistent flow properties

  • A secondary reference (like a truck scale or static scale) is available for comparison

🟢 Tip: Always clean the belt and remove any debris to avoid interference.

3. Testing Procedure

Step 1: Weigh a Reference Load

Use a secondary scale (e.g., a truck scale or platform scale) to weigh a known quantity of the same material.

Step 2: Run Material Through the Belt Scale

Convey the reference load through the belt scale system under normal conditions.

Step 3: Compare Results

Compare the total weight shown on the belt scale with the actual weight from the reference scale.

Step 4: Calculate Error

Use the formula:
Error (%) = [(Belt Scale Reading − Reference Weight) ÷ Reference Weight] × 100%

If the error is beyond acceptable limits (typically ±0.5% or ±1%), recalibrate the scale accordingly.

4. Final Steps and Recommendations

  • Record all test results for auditing and quality control

  • Recalibrate the belt scale if needed, following manufacturer instructions

  • Schedule periodic material tests (e.g., quarterly) as part of preventive maintenance

Conclusion

Performing a material test on an electronic belt scale ensures accurate and reliable measurement of bulk materials. By following proper testing procedures, you can reduce errors, prevent losses, and maintain operational efficiency.