spring plate series is also an accessory of spring plate series. The correct operation of spring plate series is inseparable from small accessories like spring plate series. Although the accessories are small, they are also related to the driving safety of the spring plate series. Therefore, special attention should be paid in the installation process and daily inspection. It can only be used after it is installed. Today we are going to learn the installation skills of nails. The following spring plate series manufacturers of urban rail track introduction!

spring plate series is also an accessory of spring plate series. The correct operation of spring plate series is inseparable from small accessories like spring plate series. Although the accessories are small, they are also related to the driving safety of the spring plate series. Therefore, special attention should be paid in the installation process and daily inspection. It can only be used after it is installed. Today we are going to learn the installation skills of nails. The following spring plate series manufacturers of urban rail track introduction!

1. It is very important to place and install safety isolation facilities. I hope you don't ignore it. Throughout the spring plate series construction process, whether it is a new road or an open road, everyone should guarantee safety facilities. For example, when working on an open road, the ratio of safety personnel to installation personnel should be 1:1. For the construction of unopened sections, the ratio of safety personnel to installation personnel is 1:3.

2. Determine the installation position and ensure that the installation position is flat. For expansion, cracks and uneven roads, the road surface should be leveled in advance;

3. Brush and other cleaning tools can be used to clean the installation position to ensure that the installation position is dry;

4. Apply appropriate amount of uniform glue on the long nail;

5. Press the long nail firmly into the installation position to ensure correct orientation. If there is too much glue, be sure to clean it up;

6. If it is a cast aluminum spring plate series with feet, it is necessary to ensure that the hole depth is greater than 1cm and the aperture is greater than 2mm;

7.spring plate series should be inspected within two hours after installation to ensure that all spring plate series are not installed upside down, tilted or under pressure.

8. After the spring plate series is cured, it will take at least 4 hours to remove and install the isolation facilities.

Although the installation of spring plate series is not very complicated, we can not ignore some details, so as to ensure the installation of spring plate series, better ensure the use of spring plate series, and ensure the safety of driving.

spring plate series https://www.hbrailwayfastening.com/Spring-Plate-Series-HuiBo.html